Cleaning And Maintenance - N'oveen SB1000 X-LINE Bedienungsanleitung

MOST COMMON PROBLEMS
P r o b l e m
The device does not work
The device stops suddenly

CLEANING AND MAINTENANCE

1. Before cleaning, switch off and disconnect the supply power.
2. Components that have come into contact with food must be cleaned regularly.
3. Self-cleaning: Put into the blender jar (bottle, grinder) proper amount of warm water,
cover the blender jar (bottle, grinder) and install on the motor base. Plug in and press the
pulse button for about 20 seconds. Then open the blender jar (bottle, grinder) and pour out
the water, wipe it with a piece of wet cloth.
Note: If the components get in touch with greasy food such as meat, manual cleaning with
tender detergent is recommended.
4. Wipe the main body with a piece of damp rinsing cloth. Do not immerse the main body
into water or other liquid. Do not wash it in water or other liquid.
5. Keep the blender in dry and ventilative place, avoid direct sunlight.
6. Allow all parts to be clean and dry thoroughly before storage.
If the bottle or grinder are not installed correctly, the
blender will not work (safety feature)
The bottle can loosen after intense use. Remove the
bottle for a moment. Then reinstall the bottle on the
base. The blender will start working properly.
17
S o l u t i o n