Blender Use Instructions - N'oveen SB1000 X-LINE Bedienungsanleitung

+ free 2 x sports case for transporting the bottle (optional)

BLENDER USE INSTRUCTIONS

1. Put the motor base on flat & dry platform. Make sure the electricity power match with the
details given on the rating label of the blender and switch is off before connecting to the
power.
2. Wash the bottle and make sure the bottle is clean inside. Cut the fruit into the cube
blocks 15*15*15mm (maximum size). Put these cube blocks into the bottle and add proper
amount of water in it. Then screw the bottle clockwise in the blade holder firmly. Note that
the water amount should not exceed the maximum capacity of the bottle.
3. Plug in.
4. Place the bottle with blade holder on the motor base and then turn the bottle
counterclockwise into the motor base. When the bottle is mounted correctly the blender
will light blue. After that, switch on and then the blender starts working. If the bottle is not
installed on the motor base properly, the blender won't operate. This is a safety feature.
13