Product Description; Operation - Kruger & Matz KMPM1 Bedienungsanleitung

PRODUCT DESCRIPTION

1. Multi functional touch panel
2. LED indicator
3. Charging case
4. Charging case battery indicator
5. micro USB port

OPERATION

• To turn on the earphones take them out of the charging
case or touch the touch panel for 2 seconds.
• To turn off the earphones put them in the charging case or
touch the touch panel for 7 seconds.
• Low battery level of the earphones is indicated with red LED
blinking every 60 seconds.
• Low battery level of the charging case is indicated with
blinking red LED.
CHARGING
1. Place both earphones in the charging case. Make sure to
place left earphone on the left side, and right earphone on
the right side. Both earphones have magnets and will align
with contacts in the charging case.
2. During charging, the LEDs on the earphones will glow red. After
complete charging the LEDs will glow green, then turn off.
3. During charging, the LED on the charging case will glow
green.
CHARGING THE CASE
1. Connect the micro USB cable to the charging case. Insert the
other plug to the compatible USB port on the PC or AC adapter.
2. During charging, the LED will glow red.
3. When the battery is full, the LED will glow green, until
disconnecting the charging case.
4
5
1
2
3