Desoutter 6159360730 Bedienungsanleitung Seite 7

Reassembly
Ensure that the seal is correctly
mounted.
● Add some glue and tighten the screws as
shown below:
1.5 Nm
Loctite 243
CUSTOMIZING THE LEDS
Colors by default
1
2
3
4
Legend
1 Red
2 Orange
3 Green
4 Blue
How to change the order
● Remove each LED by unscrewing a 1/4 turn
right.
● Reassemble the LEDs in the desired order.
● Put the cap back on the top.
08/2020
STACKLIGHT CONFIGURATION
You will need CVI CONFIG software to configure
the stacklight.
● Refer to chapter "I/O and accessories" in CVI
CONFIG user manual.
Inputs
There are 3 inputs:
- Push-button
- Key - right position
- Key - left position
● Assign an input event to each input.
Outputs
There are 5 outputs:
- Lamp 4
- Lamp 3
- Lamp 2
- Lamp 1
- Buzzer
• Assign an output event to each output.
Changing output settings can
affect actuators connected to the
controller.
7 / 40
6159931370
Issue no: 07
Series: -