Desoutter 6159360730 Bedienungsanleitung Seite 5

Wall mounting
• Secure the stacklight as shown below by
using 2 M6 screws (not supplied in the kit).
2 x Ø6.5
14.5
Mounting on DIN rail
The stacklight is designed to be
mounted on an Ω-type DIN rail.
DIN rail TS 35
Length: 115 mm minimum
• First position the 2 holders on the stacklight
as shown below by using the 4 self tapping
screws supplied in the kit.
• Clip the stacklight on the rail.
08/2020
84
Mounting on aluminium profile
• First position the 2 mounting plates on the
stacklight as shown below by using the 2
screws supplied in the kit.
• Mount the stacklight on the aluminium profile.
STACKLIGHT CONNECTION
Legend
1 eBUS cable connection
2 Termination plug SubD-9pt
Put the termination plug when:
- the stacklight is unique on the eBUS
network.
- the stacklight is the last accessory
on the eBUS network.
5 / 40
6159931370
Issue no: 07
Series: -
2
1