Philips GC6600 Serie Bedienungsanleitung Seite 9

Problem Possible cause
The appliance The water tank is empty.
produces a loud
pumping sound.
Water droplets After the Calc-Clean process,
come out of the remaining water may drip out of
soleplate. the soleplate.
The Calc-Clean process has not
been completed.
Dirty water and Impurities or chemicals present
impurities come in the water have deposited in
out of the the steam vents and/or
soleplate. soleplate.
Water flushes You have accidentally started
out of the the Calc-Clean process (see
soleplate. chapter 'IMPORTANT -
Cleaning and maintenance').
The Calc-Clean You have not set the
process does not temperature dial to CALC
start. CLEAN or you have not waited
for the iron to heat up.
You have not pressed the
Calc-Clean button for 2
seconds until the appliance
started beeping.
Solution
Fill the water tank with water and press
the steam trigger until the pumping sound
becomes softer and steam comes out of
the soleplate.
Wipe the soleplate dry with a piece of
cloth. If the Calc-Clean light still flashes and
the appliance still beeps, perform the
Calc-Clean process
(see chapter 'IMPORTANT - Cleaning and
maintenance').
You have to perform the Calc-Clean
process again (see chapter 'IMPORTANT
- Cleaning and maintenance').
Perform the Calc-Clean process regularly
(see chapter 'IMPORTANT - Cleaning and
maintenance').
Switch off the appliance. Then switch it
back on again. Turn the temperature dial to
the desired temperature setting instead of
CÁLC CLEAN. Let the iron heat up until
the 'iron ready' light lights up steadily.
See chapter 'IMPORTANT - Cleaning and
maintenance'.
See chapter 'IMPORTANT - Cleaning and
maintenance'.
ENGLISH
9