Herunterladen Inhalt Inhalt Diese Seite drucken

Phocos CIS-N-MPPT 100/30 Betriebsanleitung Seite 19

Mppt solar charge controller
Vorschau ausblenden Andere Handbücher für CIS-N-MPPT 100/30:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
Deep-discharge protection
Reconnect level
Undervoltage protection
Min. operating
Max. PV voltage
Min. PV voltage
Max. battery voltage
Temperature compensation (charge voltage)
Idle self-consumption
Grounding
Ambient temperature
Max. altitude
Battery type
Adjustment range:
Evening hours
Morning hours
Night detection
Day detection
Wire length
Wire cross section
Dimensions ( W x H x D)
Weight
Type of protection
Dimming output
Dimming value
Dimming output voltage
Impedance
Wire cross section
** : At 45°C CIS-N-MPPT 100/30 can only have full current on panel or load, not simultaneously. Above that, PV panel
power is reduced (derating).
www.phocos.com
11.0-12.0/22.0-24.0 V by SOC
11.0-11.9/22.0-23.8 V by voltage (adjustable step 0.1/0.2 V)
12.8/25.6 V
10.5/21.0 V
9 V
95 V
17/34 V
100 V
-25 mV/K @ 12 V / -50 mV/K @ 24 V
12 - 16 mA
Common negative
−40 to +60 °C
4,000 m above sea level
Lead acid (GEL, AGM, flooded),lithium (LFP)
0 – 15 h
0 – 14 h
2.5 – 10.0 V / 5.0 – 20.0 V (adjust step 0.5/1.0 V)
4.0 – 11.5 V / 8.0 – 23.0 V (adjust step 0.5/1.0 V)
20 cm
3.3 mm² (AWG 12)
128 x 150 x 42 mm
1300 g
IP68 (1.5 m, 72 h)
CIS-N-MPPT 100/30
0 – 100 % output power (adjust step 10 %)
0 V to 10 V relative to battery minus
1000 Ohm
0.5 mm²( AWG 20)
1 8 |
P a g e

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis