Operation - Klarstein Jet Set 4000 Bedienungsanleitung

EN
Air Dry: This function
runs with cool air,
primarily to air
items that require
freshening i.e: clothes
that have been stored
for a long period of
time.
Off: When the ‚Drying
Timer' dial is in the
‚Off' position no
power is supplied
to the unit. As soon
as the dial is turned
clockwise to the
desired program the
dryer will start.
Hot: For drying large quantities or bulky
items (Dryer drum is more than 1/2 full).
Select the ‚ High' heat option and set the
timer for more than 120 minutes.
22

OPERATION

Drying programs
Off: When the ‚Drying
Timer' dial is in the ‚Off'
position no power is
supplied to the unit. As
soon as the dial is turned
clockwise to the desired
program the dryer will
start.
Start button
After you have set the drying program, press the Start button. The
program starts. If the door is opened during drying or there is a power
failure, the program stops. Close the door and press the Start button
again to continue the program.
Note: The Start button is only intended to start the dryer. If you press it during drying,
the dryer will not pause. To stop the dryer, turn the knob to OFF.
Cool: This function is generally used
to cool the items that have just been
dried. This helps to prevent creasing.
Instead of the motor pushing heat
into the drum of the dryer it will
generate cool air.
Anti-wrinkle function: This
function is used for garments
that are difficult to iron. Set the
heat button to „Low" and select
time between 30 - 60 minutes,
depending on the amount of
items in the dryer. When the
timer stops, the garments will
still contain moisture, making the
ironing process easier.
Warm drying function: This
function will dry and cool items
and in most cases leave items
wrinkle free (depending on
material). Select the' High' heat
option. Set the timer between
60-120 minutes.