Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A HARDWARE TOUR
Illustrations are provided in this chapter as a visual introduction to the Drive.
Please Familiarize yourself with these illustrations and refer to them when necessary
to complete the installation and operation of the unit.
FRONT VIEW
7
PHONES
6
1 Disc loading slot
Insert the DVD-ROM or CD-ROM with the label facing up.
Precautions on playing 8 cm/3-inch Discs
¶
When playing 8 cm/3-inch discs, always use the adapter for 8 cm/3-inch discs. Before
loading the disc into the DVD-ROM drive unit, be sure to check that it is secured properly
by the catches of the adapter. If discs have been inserted without the adapter by mistake,
remove the disc immediately by pressing the eject button. If the disc does not come
out with one press, press another time.
¶
Use 8 cm/3-inch disc adapters labeled with the
product). Do not use adapters which cause the disc to idle, nor adapters which are
bent or curved.
2 Eject (0) button
This button is used to eject the disc.
3 BUSY indicator
Flashes during data access.
4 DVD indicator
Lights when a DVD is loaded.
5 Volume Control (headphone level)
This is used to adjust the volume level of the headphone jack.
6 Headphone jack (PHONES)
This is a stereo minijack for headphones.
7 Hole for forced ejection
When the eject button has lost its function, insert an accessory pin for emergency
ejection into this hole and push to eject the disc.
WARNING:
÷ Before executing this operation, be sure to switch off the power supply of the
computer and confirm that the disc loading is stopped. It takes approx. 30 seconds
to stop loading a disc after switching off the power supply.
÷ Always use the pin provided (Do not use other objects).
DVD-ROM DRIVE
DVD
5
BUSY
4
3
2
'
mark (recommended standard
1
Fig. 1
7
<DRC1074>
En
Werbung
Inhaltsverzeichnis
