Operation - Mitsubishi Electric RC-380P1 Bedienungsanleitung

Operation

When operating the interactive pen, see also the manuals supplied with the projector and the
computer.
Preparation:
• Connect the projector to the computer using the USB cable supplied with the projector.
• Confi gure the settings for using the interactive pen in the menu of the projector.
• Project the image supplied from the computer.
Pen tip
1. Turn the power switch to ON.
• The LINK indicator blinks red and the interactive pen starts searching for the operable
projector.
• When the projector is found, the LINK indicator illuminates in green or blinks rapidly,
showing that the computer is operable via the projector.
• When the projector isn't found or the interactive pen isn't operated for a certain period
of time, the LINK and BATTERY indicators illuminate in red and then go off, and the
interactive pen turns in low power mode.
2. Point the pen tip at the screen.
• See next page on how to hold the pen.
3. Operate the computer using the buttons described below while viewing the projected
images.
Button
L button
Pen tip
R button
P button
4. After the operation is completed, turn the power switch to OFF.
EN-8
Downloaded from www.Manualslib.com
L button
R button
This button works as the left button of a mouse. (When pressed, it works as
the click operation, and when the interactive pen is moved while the button is
pressed, it works as the drag operation.)
Pressing this button during the low power mode resumes the operation mode.
When the pen tip is pushed to the projected screen, it works as pressing the L
button.
This button works as the right button of a mouse. (When pressed, it works as
the click operation, and when the interactive pen is moved while the button is
pressed, it works as the drag operation.)
Pressing this button during the low power mode resumes the operation mode.
When this button is held down, the mode of the interactive pen switches to the
pairing preparation mode.
When this button and the R button are held down at the same time, the pairing
setting is cancelled. (For the details of the pairing, see the User Manual supplied
with the projector.)
manuals search engine
P (pairing) button
BATTERY indicator
LINK indicator
Function
Power switch