iStorage diskashur DT2 Schnellstartanleitung Seite 5

Adding a New User PIN in addition to the Admin PIN
In addition to the Admin PIN, the diskAshur DT
To create a new User PIN follow the steps below.
1. In Standby State (solid
press and hold down both the 'UNLOCK
and number '1' buttons.
2. Enter your Admin PIN (default
'11223344') and press the
'UNLOCK' button.
3. In Admin mode (solid
and hold down 'UNLOCK + 3' buttons.
4. Enter your NEW User PIN and press
'UNLOCK' button.
5. Re-enter your NEW User PIN and press
'UNLOCK' button.
6. To exit Admin Mode press the 'LOCK'
button.
Unlocking with either the Admin or User PIN
Unlock with Admin PIN ( PIN +
1. To unlock the diskAshur DT
GREEN and BLUE
indicating the drive is unlocked and ready to use as Admin.
Unlock with User PIN (
2. To unlock the diskAshur DT
then enter your User PIN and press the 'UNLOCK' button again.
blink several times and finally changing to a solid
ready to use as the User.
For more features and detailed instructions please refer to the user manual pre-loaded on your new diskAshur DT
and also available on our website.
Downloaded from www.Manualslib.com
RED LED),
BLUE LED), press
as Admin, enter your Admin PIN and then press the 'UNLOCK' button.
2
LEDs will alternately blink several times and finally changing to a solid
+ PIN +
as the User, press the 'UNLOCK' button, all LEDs will blink on and off,
2
manuals search engine
can be configured with an independent User PIN.
2
Solid RED LED will change to blinking
BLUE LEDs.
GREEN and BLUE
few seconds then to a solid
BLUE LED indictaing the diskAshur DT
Mode'.
Solid BLUE LED will change to blinking
solid BLUE LEDs.
Blinking GREEN
a single GREEN
GREEN and solid
GREEN LED rapidly blinks for a few seconds then
changes to a solid
has been successfully created.
Solid RED LED indicates the drive is locked and in
the standby state.
)
)
GREEN
GREEN LED indicating the drive is unlocked and
GREEN
LEDs blink rapidly together for a
GREEN and finally a solid
is in 'Admin
2
GREEN
and solid BLUE LEDs will switch to
LED blink and then back to blinking
BLUE LEDs.
BLUE LED indicating the User PIN
GREEN
and BLUE LEDs will alternately
and
and
LED
2
5