Etherma LAVA ARCUS Montage- Und Gebrauchsanleitung Seite 11

O V E R V I E W O F T Y P E S A N D V E R S I O N S
LAVA ARCUS
®
The LAVA ARCUS is an infrared heating device with a high in-
®
tensity of radiation. The device is characterised by its homoge-
neous temperature distribution and its fast heating response.
Thanks to its internal insulation, it heats the room with a maxi-
mum radiation intensity. As standard, the LAVA
with only one connecting cable.
ET-111C RADIO RECEIVER
The radio receiver is fixed to the rear side of the LAVA
CUS. When connected to an ET-14A, the ET-111C radio receiver
provides for easy switching of up to ten LAVA
heaters.
S C O P E O F D E L I V E R Y | P A C K A G I N G
The LAVA ARCUS infrared heating must be mounted exclusive-
®
ly using the fixing components included in the scope of delivery.
STANDARD SCOPE OF DELIVERY FOR CEILING INSTALLATION
& WALL MOUNTING:
- LAVA ARCUS infrared heating
®
- 1 wall/ceiling bracket
ET-14A RADIO-CONTROLLED ROOM THERMOSTAT
ET-14A is a radio-controlled room thermostat which is provid-
ed with a clock for measuring the temperature in living spac-
es, office spaces and in hotel rooms. Elaborate demolition and
plaster work for cable routing is avoided which allows an easy
installation. The thermostat can be mounted on a flush box or
ARCUS comes
®
surface-mounted box on the wall.
WIRED ROOM THERMOSTATS:
Ideal for new buildings and renovation, for example when re-
AR-
®
placing old night storage heaters, which were controlled by
thermostat.
design infrared
®
Screws and dowels (not included in the scope of delivery) must
be suitable for the construction material of the ceiling and/or
wall (masonry, concrete, plasterboard, etc.). The surface of the
ceiling or wall must be even.
11