Cleaning And Maintenance - AmazonBasics AB-BF411-PC Montageanleitung

• Check to make sure the faucet is tight.
• Slowly open one water inlet valve and check for leaks. If there are no leaks, open the valve all
the way.
• Slowly open the other water inlet valve and check for leaks. If there are no leaks, open the valve
all the way.
NOTICE
• Push the lever up and towards the left and make sure you have hot water coming out of the faucet.
• Pull the lever up and towards the right and make sure you have cold water coming out the faucet.
• While the water is running, check for leaks.

Cleaning and Maintenance

• Avoid using abrasive chemicals when cleaning. Read the cleaner product label prior to use.
• To change the faucet cartridge, shut off both water inlet valves. Remove the hot/cold indicator
and use a hex key to loosen the hex head screw just enough to remove the handle. Unscrew
the cartridge cap and nut using needle-nose pliers and pull the cartridge out to remove.
12
If a leak is spotted, close the valve and remove the water line. Clean the
threads on the valve and wrap plumber's tape around the threads and re-
attach the water line. Check for leaks again.