Renkforce CR22E-SIM Bedienungsanleitung Seite 3

Operating Instructions
Card reader CR22E-SIM USB 2.0
Item No. 2183242
Intended Use
This product is intended for writing and reading data on memory cards. The card reader is
suitable for PCs with USB 2.0 port and is downward compatible with USB 1.1.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires or other hazards. Read the instructions
carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Card reader
• USB extension
• Software CD
• Empty box for memory cards
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
Driver installation
Mac OS operating systems do not support the SIM card editor.
Please refer to the user manual on the CD provided in order to obtain more
information on the functions of the SIM card editor software.
In order to edit data on SIM cards, the SIM card driver must be installed. Insert the driver CD
into the CD-ROM drive of your computer. A window for installing the software should open
automatically. If not, proceed as followed:
• Click "Start" followed by "Execute".
• Enter "D:\" and then press the Enter button. "D:" refers to the CD-ROM drive.
• The installation wizard should start.
Installing the SIM card editor:
• Left in the installation window there are three buttons: "SIM/SMART/IR", "USER MANUAL"
and "EXIT". Selecting "SIM/SMART/IR" will start the driver installation. Selecting "USER
MANUAL" will display the operating instructions for the SIM card software. Selecting "EXIT"
will exit the program.
• Press "SIM/SMART/IR" to start the installation process. Installation takes place
automatically. It might be necessary to restart the computer after installation is complete.
• After completion of the installation process the SIM card editor software will be ready for
use.
Operation
• Turn on your computer and wait until your operating system has started up.
• Use the USB cable attached to the product to connect the card reader to a free USB 2.0 port
on your computer. If necessary, use the USB extension cable for a more flexible connection.
The operating system automatically recognizes the card reader and displays all installed
cards as drives on the user interface.
• The computer opens a window with a message stating that the system is searching for the
SIM card driver.
• In order to install the SIM card driver, follow the on-screen instructions. You may also refer
to the previous chapter "Driver installation". When not using a SIM card, you can skip this
step.
• Windows recognizes the card reader automatically. The slots will be displayed as additional
drives of your computer. A memory card inserted in the card reader will be integrated like a
normal removable storage drive.
Inserting/removing memory cards
• Insert the memory card into the respective slot of the card reader. Only one direction is
supported. Do not forcibly insert the card. It is possible to use several slots at the same time,
e.g. for exchanging data between different memory cards.
• Wait until read/write access to the memory card is complete.
• Then you can carefully remove the memory card. When removing a memory card during
read/write access (or when disconnecting the card reader from the computer), data on the
card can get corrupted. It may also be necessary to format the card in this case.
Remove all inserted cards before disconnecting the card reader from the computer
or switching off the computer, as data on the memory cards could get damaged
otherwise.
Reading/writing data on memory cards
A memory card inserted in the card reader will be integrated like a normal removable storage
drive. You can read data on the memory card (or store on the card) the same way it is done
with USB hard drives or USB sticks.
SDXC memory cards of up to 64 GB are supported.