Playback Functions; Bluetooth Mode - Telefunken SA101BR2 Bedienungsanleitung

6. OPERATION
„
„
„
„
„
6.2

Playback functions

„
„
Key
6.3

Bluetooth mode

„
„
„
„
„
„
„
„
„
„
„
Downloaded from www.Manualslib.com
Use the volume and equalizer controls of the sound base to regulate the audio settings
( 5 . Basic functions).
Use the controls of the connected external device to regulate the playback. Alternatively,
use the playback controls of the sound base (
Note: The source selection is saved in the memory even after the appliance is set to
standby mode.
The audio output of this appliance is effected by the settings of the connected source. If
necessary, adjust the settings of the source device to improve the audio output.
If there is no signal within
standby.
All playback functions can be managed through the controls of the connected external
device.
Alternatively, use the remote control in Bluetooth mode.
Function
(17) During playback:
Press 1 x: Pause playback.
Press and hold a few seconds: Disconnect the Bluetooth pairing.
(16) Press 1 x: Skip to the beginning of the next title.
(22) Press 1 x: Skip to the beginning of the previous title.
External Bluetooth devices can be connected to the appliance via Bluetooth connection.
Press repeatedly SOURCE or
the display (3) with the Bluetooth indicator light
Activate the Bluetooth function of the external device and search for Bluetooth devices.
Select SA101BR2 from the Bluetooth device list.
Follow the instructions shown on your device's screen. Specific pairing procedures
may vary with different Bluetooth devices. Refer to your device's manual for further
information.
When the Bluetooth connection is established, the Bluetooth indicator light
flashing and turns stably on.
Files from your connected Bluetooth device are played through the sound base now.
Disconnecting from the Bluetooth device:
Press and hold
Choose a different source, or
Disconnect using your Bluetooth device.
Note: Bluetooth works best within a range of up to
The music streaming may be interrupted by obstacles between the device and speaker,
such as walls, metallic casing that covers the device, or other devices nearby that operate
in the same frequency.
If the connected device goes out of Bluetooth range, the appliance will reconnect
automatically when the device comes back into range.
manuals search engine
6.
13 to 16 minutes, the appliance will automatically enters
directly to activate the Bluetooth function. BT appear on
(2)
(17) for a few seconds,
29
Playback functions).
flashing constantly.
10 metres.
EN
(2) stops