Tenneker 10150361 Gebrauchsanweisung Seite 127

Ventilation Control 2x
Wing Nut M6
Spring Washer Ø6
Screw M6x12
Lid handle
Wing Nut M6
Washer Ø6
Temperture Gauge
Put the screw M6 through the open-
ings in the ventilation control and
the lid and fix with the wing nut M6
and the spring washer Ø6.
Attach the handle to the lid with two
M6 wing nuts and two washers Ø6.
Remove the wing nut and washer
from the temperature gauge and
use it to attach the temperature
gauge to the lid.
Charcoal Grate
Outer Cooking Grate
Inner Cooking Grate
Place the charcoal grate on the
lower rests of the grate holders.
Place the outer cooking grate on the
upper rests of the grate holders.
Place the inner cooking grate on the
rests of the outer cooking grate.
1x
9
M6x12
Lid 1x
1x
1xØ6
1x
1x
1x
2x
2x
1x
10
1x
1x
1x
Change the
ventilation control
screws set from M5
3xM6
to M6.
Add washer Φ6 on
the part list.
2xØ6
Exchange the
inner cooking
grate and
charcoal grate
pic.
ENGLISH | 127