Athena GET WiFi-COM Handbuch Seite 5

C. INSTALLATION AND OPERATION OF WIFICOM
1.
Fix the Wifi-COM in a
well protected point on the
motorcycle. If it is installed on
the top of the front fork, fasten
it using the zip ties.
ATTENTION:
Make sure that the device is in
a position protected against
impacts and far from spark
plug cables, coils and sources
of excessive heat.
2.
Connect the Wifi-COM
connector to the one on the
"MAIN" cable of the GET control unit.
WIFICOM
ATTENTION:
-Always make sure that the
connectors are correctly
associated; when connecting
them, a "click" is heard that indicates
they are connected correctly.
-If you want to use Wifi-COM
together with other GET
accessories (e.g. GPA Switch,
LC-GPA,...) the GL-0084-AA wiring
(sold separately) can be connected
to the control unit, the WiFi-COM
and the other GET accessory.
-Make sure that the free
movement of the handlebar
in both directions is not
obstacled; and that the product
never obstacles or interferes
with the moving components of
the motorcycle or the pilot.
5
3.
Download the WiGet app to
your phone/tablet from the App
Store / Google Play.
GET ECU
EN IT