System Components - Rohloff E-14 Original Bedienungsanleitung

System components

1: 8801 - Rohloff E-14 Switch Unit
2: 8802 - Rohloff E-14 DC/DC-CAN Converter
3: 8803 - Rohloff E-14 Shifter Unit
4: 8804-8810 Rohloff E-14 Cable
5: Drive Unit
6: Battery
7: Connecting-Cable to ebike System
ǂ: Connectors
1: Art.#8801 – Rohloff E-14 Switch Unit
The Switch Unit is designed to fit around handlebars with a diameter of 22 – 22.3mm
(7/8").
A custom version of the Switch Unit to fit 23.8mm (15/16") dropbars is available upon
request (not included in kit as standard).
The Switch Unit can be mounted on either side of the handlebar.
2: Art.#8802 – Rohloff E-14 DC/DC-CAN Converter
The Rohloff E-14 DC/DC-CAN Converter is the central electronical connection between
the Rohloff E-14 shifting system and the eBike system.
The Converter not only ensures the correct, continuous energy supply but also provides
the communication gateway for all components.
The Converter is typically located in either the downtube or seattube (seat height
adjustment may be compromised) of the bicycle frame.
3: Art.#8803 – Rohloff E-14 Shifter Unit
The Rohloff E-14 Shifter Unit is the electromechanical component responsible for
physically shifting the gears of the SPEEDHUB 500/14.
4: Art.#8804-8810 Rohloff E-14 Cables
As the Rohloff DC/DC-CAN Converter is located roughly in the center of each frame and
the the Rohloff E-14 Shifter-Unit is located at the rear of the bicycle, on the SPEEDHUB
unit itself, a connection cable will be required to bridge that distance.
16