Hella marine Naviled 2LT 980 520 Serie Gebrauchsanweisung

Warranty / Garantieerklärung / Garantie
Congratulations! The product you have selected comes from HELLA – one of the world's leading manufacturers of lighting products.
The product comes with a 5 year warranty from end user purchase covering faults in materials, components or workmanship.
In the unlikely event that you should experience a confirmed warranty related problem with your purchase, HELLA will, at its discretion, either
repair, replace or refund the purchase price of the product. Warranty services may be obtained by returning the product within the warranty
period to the HELLA dealer where the product was originally purchased.
This warranty is in addition to and does not preclude any other rights or remedies available to the consumer under any local legislation related
to the provision of goods or services.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
This warranty does not cover:
1. Claim/s as a result of normal wear and tear or of any modifications and / or alterations to the product in any shape or form.
2. Claim/s as a result of non-compliance of the assembly, service and operating instructions and/or any unfit or improper use.
3. Any expenses incurred in the process of making the claim.
Note: For lamps sold in Australia, warranty services are provided by Hella Australia Pty Ltd., 4 Hargrave Place, Mentone, Victoria, 3194 Australia.
Customer Service 1800 061 729 email: custservice@hella.com https://www.hella.com/hella-au/assets/media_global/IAM_Statement_of_Warranty.pdf
For general comments about Hella marine products please email techfeedback@hellamarine.com
Herzlichen Glückwunsch! Das von Ihnen erworbene Qualitätsprodukt kommt von HELLA, einem der führenden Hersteller von
Beleuchtungssystemen weltweit, und ist mit einer Garantie von 5 Jahren ausgestattet. Diese deckt Fehler in Materialien, Komponenten
und Verarbeitung ab und gilt ab Kaufdatum.
In dem unwahrscheinlichen Fall, dass ein Produkt tatsächlich fehlerhaft ist und ein Garantiefall vorliegt, wird HELLA Ihr Produkt nach eigenem
Ermessen reparieren, ersetzen oder den Kaufpreis zurückerstatten.
Garantieleistungen können durch Rücksendung der Ware innerhalb der Garantiezeit an den HELLA-Händler, bei dem das Produkt ursprünglich
gekauft wurde, erhalten werden.
Diese Garantie gilt zusätzlich zu allen anderen Rechten oder Rechtsmitteln, die dem Verbraucher im Rahmen einer lokalen
Gesetzgebung in Bezug auf die Bereitstellung von Waren oder Dienstleistung zur Verfügung stehen und schließt diese nicht aus.
Diese Garantie gilt nicht für:
1. Ansprüche, die aus normalem Verschleiß des Produktes oder etwaigen Änderungen oder Modifikationen am Produkt in irgendeiner Form entstehen.
2. Ansprüche, die als Folge aus Nichteinhaltung der Montage-, Service-, oder Bedienungsanleitung oder durch unsachgemäßen Gebrauch entstehen.
3. Jegliche Kosten, die durch Inanspruchnahme der Garantie entstehen.
Wenn Sie Fragen oder Anmerkungen zu HELLA Produkten haben, kontaktieren Sie uns bitte per E-Mail: techfeedback@hellamarine.com
Félicitations ! Le produit que vous venez d'acquérir est conçu et fabriqué par HELLA, l'un des premiers fabricants mondiaux d'éclairage.
Ce produit est couvert par une garantie de 5 ans à partir de la date d'achat par l'utilisateur final, cette garantie couvrant tout défaut
lié à la fabrication, aux matériaux ou aux composants utilisés.
Dans l'éventualité peu probable que où rencontriez un cas avéré de garantie sur le produit acheté, HELLA pourra, à sa discrétion, soit réparer,
soit remplacer le produit ou encore rembourser celui-ci à hauteur de sa valeur d'achat.
Pour toute demande de prise en charge d'un produit sous garantie, veuillez retourner celui-ci dans les délais impartis auprès du revendeur
HELLA où l'achat a été effectué.
Cette garantie s'applique en complément et ne s'oppose pas à tous autres droits ou recours dont le consommateur pourrait bénéficier au terme
de la législation locale en vigueur relative à la prestation de biens ou de services.
La garantie ne couvre pas:
1. les réclamations découlant d'une usure normale du produit ou faisant suite à toute modification ou altération du produit sous quelque forme
que ce soit.
2. toute réclamation résultant du non-respect des instructions de montage, d'entretien ou d'utilisation ou encore d'un usage inadapté ou
détourné du produit.
3. tout frais engendrés par la demande de prise en charge.
Pour tout commentaire ou suggestion sur les produits HELLA, nous vous invitons à nous contacter par email: techfeedback@hellamarine.com
Dimensions/Abmessungen
33
ENGLISH
DEUTSCH
FRANCAIS
71 50
53
INSTRUCTION SHEET: 2NM Port, Starboard, Stern and Towing
2LT 980 520-xxx
for:
HELLA marine LED Navigation Lamps offer many advantages over conventional bulb lamps. Significantly reduced power consumption,
ultra long life and high tolerance to shock and vibration make the LED lamps the ideal choice for the harsh marine environment.
HELLA marine NaviLED series are Precision Optical Instruments, tested and type approved to comply with international maritime
®
regulations.
Product specifications:
Material Description: UV resistant lens, high impact shroud
Minimum Visible Distance: 2 Nautical Miles
Cable: Pre-wired with marine cable
Operating Voltage: Multivolt 12V/24V
TM
Power Consumption: Port and Starboard < 2W combined, Stern or Towing < 2W
Degree of protection: IP 67 - Completely sealed
Approvals: ABYC A-16 and NMMA / USCG33 CFR 183.810 2NM /
Electromagnetic Compatibility (EMC): This Multivolt
TM
that suppress possible interference, both emission as well as susceptibility, to the limits prescribed in international regulations.
Wiring & Protection: LED modules are polarity conscious. Reverse polarity will not damage this product but will inhibit its function.
HELLA marine recommends wire connections be soldered and heat shrink tubing applied to seal the joint. Lamp must be protected by
a fuse rated at 3 amperes maximum. Note: do not attempt to open - no serviceable parts inside.
Colour Connect to
Black Negative (-)
Red Signal (+)
Grey Signal (+)
Service life: It is an inherent characteristic of LEDs that they will degrade and lose luminous intensity over time. Hella marine design LED
Navigation lamps with a significant performance safety margin however as a precautionary measure due to normal service degradation,
we recommend NaviLED lamps be replaced after 10,000* hours of operation.
* e.g. With a usage of 500 hrs per year the lamps should be replaced after 20 years.
Positioning of Port and Starboard Lamps
Installation angle:
Parallel to the vessels centre line (see Fig.1) and so the rear surface of the mounting shrouds
are vertical (see Fig.2). Direction arrows point right ahead.
Position on the vessel:
Mounted in the same athwartships position and at the same height above the water line and
mark the effective beam of the vessel.
Positioning of Stern or Towing lamps
Installation angle:
At right angles to the vessels centre line and so the rear surface of the mounting shrouds are
vertical. Direction arrow points right astern. Towing lamp must be mounted in a vertical line
above the stern lamp.
Position on the vessel:
As close as practical to the stern of the vessel.
When the lamps are operating, the light should not be obstructed or concealed by
superstructures or other objects.
Installation Steps
Step 2: Mount the Shroud
2.1 Shroud must be installed with markings on
the TOP horizontal surface.
Power cable
position
2.2 Arrow must point right ahead for Port and
Starboard lamps and right astern for Stern
and Towing lamps.
Step 1: Power cable
Make provisions for the power cable.
IMO COLREG 72 / RINA
LED lamp is an electronic device. The electrical circuits contain components
Power
Port and Starboard <2W combined
Stern or Towing <2W each
Fig.1 Parallel to the vessels centre line.
Top
view
Fig.2 Vertical to the vessels centre line.
Bow
view
Step 3: Insert the Optic Assembly
Markings
3.1 Connect power
3.2 Feed power cable and test lamp
3.3 Firmly push light module into Shroud
E.g. - Port Lamp
112.5 Degrees.
E.g. - Port Lamp
Shroud
Light module
959 150-89 / 06.19