Nacon Revolution Unlimited Pro Handbuch Seite 10

EN /
2/ Mode 1: PS4™ Normal mode
PS4™ Normal mode is selected by moving the 'Mode' switch to
position 1.
I In this mode the controller supports the following features:
- Motion sensors
- Touch pad
- Dual vibrations
- 3.5mm headset jack
- PS, SHARE and OPTIONS buttons
- L1 and R1 shoulder buttons
- L2 and R2 analogue triggers
- Left stick with L3 button
- Right stick with R3 button
- 8-way directional pad
- Action buttons
- Shortcut buttons
I Shortcut buttons
You can remap any button (excluding PS, SHARE, OPTIONS and touch pad
buttons) to the shortcut buttons as follows:
- Press and hold the Profile button for 3 seconds. The Blue halo around the right
stick will pulse
- Press on the shortcut button you want to assign. The corresponding LED will
turn ON. LED1 for S1 / LED2 for S2 / LED3 for S3 / LED4 for S4
- Then press on the button that you want to assign to the Shortcut button.
The LED will flash 3 times to confirm the mapping is successful
- Press and hold the Profile button for 3 seconds to confirm and quit the
remapping function
NOTE: The REVOLUTION Unlimited Pro Controller does not feature a built-in speaker or light bar.