YATO YT-85170 Originalanleitung Seite 15

GB
Do not use the Vacuum to suck in wet, damp or hot waste. Do not suck in construction waste and dust generated during construc-
tion works, e.g. dust generated when fi nishing gypsum coats. The appliance is not suitable for use with such materials.
If the appliance features a variable speed, use the lowest speed possible to carry out your work. Higher speeds cause more noise
and also cause faster wear of the product.
Walk and keep your balance at all times, do not run, do not jump, do not overreach during the appliance operation. Do not use the
appliance to clean a surface which is out of sight.
APPLIANCE MAINTENANCE AND STORAGE
Each time you fi nish the work, disconnect the power cord from the power outlet and begin maintenance activities. Dismount the
nozzle and the collection bag, if used. Clean both the ventilation openings and the inlet and outlet openings with a soft plastic brush.
Clean the casing, handle and controls with a soft, slightly damp cloth and then dry them. A compressed air line with a pressure of 0.3
MPa or less can also be used for cleaning purposes. Once the nozzle is removed, it can be cleaned with a jet of water and then dried
or left to dry. Empty the collection bag by unzipping it and removing dust residue using a stream of compressed air of 0.3 MPa or less.
Do not use sharp objects, abrasives, solvents or alcohol to clean the appliance.
Spare parts
The user is not permitted to replace any other parts than the nozzle and the collection bag. For a detailed list of spare parts for the
appliance go to the "Download" section in the Product tab on the TOYA SA website: www.toya.pl.
Storage of the appliance
Store the appliance disassembled. The storage room guarantee that unauthorised access to the appliance is prevented. The
storage space must be protected from moisture, direct sunlight and excessively low temperatures. Store the appliance in a tem-
perature range of 0~+40°C, with a max relative humidity of 80%. It is recommended to store the product in the factory packaging.
O R I G I N A L I N S T R U C T I O N S
15