Security Advise; Parts List; Technical Data; Installation Diagram - Widoberg HDP-II Bedienungsanleitung

SECURITY ADVISE:

Never point guns at yourself or at other persons.
Before any repair work may be carried out, the guns must be disconnected from the compressed air network
and pressure must be released. Further on the stop cock no. 10.182.6 for the spraying compound has to be
closed.
Defect components have to be repaired or replaced, use original Widoberg spare parts only.
Before starting to use the gun, particularly after repairs, ensure that screws and nuts are correctly tightened
and check that tubes or hoses are not leak and properly fixed to the gun.

Parts list

Item no. Description
51 Banjo connection
¼
52 Check valve assembly
53 Connecting piece
54 Sealing ring
55 Stop cock
56 Hose connection
¼
57 Cup seal
¼
58 Usit sealing ring
59 Cylinder flange
60 Cylinder
¼
61 Plunger
62 Strip ring
¼
63 Compression spring
¼
64 Sealing ring for piston assembly 10.164.8
65 Countersunk screw
66 Spindle
67 Cylinder cover
68 Retaining nut
69 Knurled knob
70 Flat head screw
71 Quick connection
72 Sealing ring 1/8"
¼
These parts subject to wear and should be kept in stock.

Technical Data

Air pressure/spray gun
Material (compound) pressure
Hose ID; air
Hose ID; material (compound)
3-way valve - normally closed –
port size
Minimum flow ‡
Spray amount per shot (adjustable)
Air consumption/spray gun
Part no.
10.181.8
10.124.9
10.135.4
10.185.0
10.182.6
11.172.4
10.166.4
10.167.2
10.312.8
11.148.1
10.115.0
10.313.6
11.145.7
10.169.9
11.151.1
11.150.3
11.155.4
11.153.8
11.154.6
11.156.2
11.157.0
75 – 90 p.s.i.
50 – 90 p.s.i.
3/8´´
1/2´´
3/8" NPT
1/4"
0.2 – 3 cm 3
approx. 0.75 m 3 /h
Item no. Description
¼
73 O-ring
74 O-ring
¼
75 Piston assembly
76 Cap
77 Hexagon nut
78 Knurled nut
79 Compression screw
80 Threaded bushing
81 Spring plate
¼
82 Compression spring
83 Collar
¼
84 Needle valve
85 Guide bushing
¼
86 Cup Seal
87 Grub screw
88 Gun body
89 Insert assembly
¼
90 Valve seat
91 Nozzle
92 Retaining nut
93 Bleed valve assembly

Installation diagram

(See page 24)
A Compo connection
B Air connection
C Solenoid valve
D Pressure vessel or pump
E Main line (air)
F Pressure control
Part no.
10.170.2
10.161.3
11.147.3
10.163.0
10.165.6
10.109.5
10.104.4
10.103.6
10.105.2
10.106.0
10.107.9
10.108.7
10.102.8
10.162.1
10.160.5
10.101.0
10.110.9
10.129.0
10.111.7
10.134.6
13