Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Error Messages

Symptoms
Reason
Water supply is not adequate in
area.
Water supply taps are not
completely open.
Water supply hose(s) are kinked.
are clogged.
If water leakage occurred in Aqua
stop supply hose indicator
will become red.
• May vary depending on the model.
Load is too small.
Load is out of balance.
The appliance has an imbalance
detection and correction system.
If individual heavy articles are
loaded (e.g. bath mat, bath
robe, etc.) this system may stop
spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at
the end of the cycle, add smaller
articles of laundry to balance the
load and repeat the spin cycle.
Solution
• Check another tap in the house.
• Fully open tap.
• Straighten hose(s).
• Use the new Aqua stop supply hose.
• Add 1 or 2 similar items to help balance
the load.
• Add 1 or 2 similar items to help balance
the load.
• Rearrange load to allow proper spinning.
• Rearrange load to allow proper spinning.
EN
37

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis