External Control Device Setup; Open Source Software Notice - LG 47LB656V Benutzerhandbuch

D
3
Coloured buttons These access special functions in some
menus.
( : Red, : Green, : Yellow,
4
TELETEXT BUTTONS These buttons are used for teletext.
Returns to LIVE TV.
/ Selects the MHP TV menu source. (Only Italy.) (Depending
on model)
(
contents, Time Machine or SmartShare menus or the SIMPLINK
Ready
compatible devices (USB or SIMPLINK or Time Machine
Starts to record and displays record menu. (Only Time Machine
supported model)
Ready
Recalls your preferred subtitle in digital mode.
By Pressing AD button, audio descriptions function will be
enabled.
Selects Radio, TV and DTV programme.
Licenses
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
Open source software
notice
To obtain the source code under GPL, LGPL, MPL and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date
on which you purchased the product.
14
External Control Device
Setup
: Blue)
To obtain the external control device setup information, please visit
www.lg.com.
) Controls the Premium
Troubleshooting
).
Ready
Cannot control the TV with the remote control.
• Check the remote control sensor on the product and try again.
• Check if there is any obstacle between the product and the remote
• Check if the batteries are still working and properly installed (
No image display and no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
The TV turns off suddenly.
• Check the power control settings. The power supply may be
• Check if the Automatic Standby(Depending on model) / Sleep
• If there is no signal while the TV is on, the TV will turn off
When connecting to the PC (HDMI/DVI), 'No signal' or 'Invalid Format'
is displayed.
• Turn the TV off/on using the remote control.
• Reconnect the HDMI cable.
• Restart the PC with the TV on.
control.
to , to ).
products.
interrupted.
Timer / Timer Power Off is activated in the Timers settings.
automatically after 15 minutes of inactivity.