SOLIS PRESTIGE Blender 837 Bedienungsanleitung Seite 37

Fig. 1
The inner lid can be removed to add ingredients or
check the texture of ingredients.
Fig. 2
The Solis Prestige Blender features a Lid. This allows
the lid to fit tightly onto the blender jug, avoiding
displacement during operation. The ring pull design
allows the user to easily remove the lid with a
simple leverage action. (See Fig 2)
Step 5.
Plug the power cord into a 230V power outlet and
switch on.
Step 6.
Press the 'Power' button on the far left of the
control panel to turn the blender on. The 'Power'
button will illuminate and flash. The LCD timer
screen will illuminate with '00' displayed.
Do not fill the blender jug above the 'MAX' line.
When the blender jug is filled at or near the 'MAX'
line place one hand on the blender lid to avoid
displacement of the lid during operation.
Step 7.
Select the required speed (1 to 5) by pressing the
corresponding speed button. The blender will start
to operate and the selected speed button will illumi-
nate. The 'Power' button will illuminate and cease to
flash. The 'Stop' button will illuminate and flash. The
LCD timer screen will start counting upwards in one
second increments until 120 seconds is reached.
Operate the blender only for the appropriate
amount of time required – do not over blend.
Step 8.
When 120 seconds is reached, the blender will au-
tomatically cease to operate and the selected speed
button and 'Stop' button illumination will go out.
The 'Power' button will illuminate and flash. After a
few seconds the LCD timer screen will revert to '00'.
• The Solis Prestige Blender will automatically stop
blending after 120 seconds (2 minutes). This is
a safety feature and restricts wear on the motor.
• To stop blending at any time, press the 'Stop'
button or the selected speed button. The Power'
button can also be pressed, but this will also turn
the appliance off and all illuminations will go out.
• The speed can be changed at any time during
the blending process. Each time a new speed is
selected its button will illuminate and the previous
speed button illumination will go out. The number
of seconds on the LCD timer screen will continue
to count upwards to 120 seconds unless inter-
rupted.
Step 9.
The Solis Prestige Blender features two additional
functions, 'ICE CRUSH' and 'SMOOTHIE'. These are
pre-programmed cycles which automatically adjust
the blending time and speeds to improve blending
results. Select the required function by pressing the
corresponding function button. The blender will start
to operate and the selected function button will illu-
minate. The 'Power' button will illuminate and cease
to flash. The 'Stop' button will illuminate and flash.
The LCD timer screen will start counting downwards
in one second increments until '00' is displayed.
The smoothie function has a processing technique
that blends the denser ingredients at a lower
speed, then increases as ingredients thicken. This
may happen several times while blending smoothies.
When '00' seconds is reached, the blender will
automatically cease to operate and the function
button and 'Stop' button illumination will go out.
The 'Power' button will flash.
E
37