Connecting A Soundbar To A Mobile Device Via Nfc Function - Samsung HW-T400 Bedienungsanleitung

Disconnecting the Soundbar from the TV
Press the button on the right side panel or on the remote control and switch to any mode but
"Bluetooth".
• Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
• To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold
button for 5 seconds in "Bluetooth Ready" mode. TV Connect is turned OFF.
• To turn TV Connect back on, press and hold the
"Bluetooth Ready" mode.
• TV Connect is set to ON by default.
Mode
TV Connect-OFF
TV Connect-ON

Connecting a Soundbar to a mobile device via NFC function

Step 1. Place your mobile device in the NFC detection area on top of the Soundbar
Bluetooth device
NOTES
– Make sure that your mobile device has the NFC function turned on and that the screen is active.
– Bluetooth connection is unavailable when NFC of the mobile device is in card emulation mode.
Remote control Button
NFC
button for 5 seconds with the Soundbar in
5 Sec
5 Sec
Top of the Soundbar
ENG - 17
LED indicator
Blinking
B W W R
Blinking
B W W G