Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Digital Soldering Iron 230 V 80 W
Item No. 2141866
Intended Use
The product is a soldering iron with LCD display and tactile control buttons. A grounded power
cable provides additional safety during use. It comes with a soldering iron stand and connects
directly to a mains power outlet.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Soldering iron
• Stand
• Operating instructions
Up-to-Date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Electrical Connection
• The mains outlet must be located near to the device and be easily accessible.
• Never pull the mains plug from the socket by pulling at the cable. Always pull it
from the mains socket using the intended grips.
• Unplug the mains plug from the mains socket if you do not use the device for an
extended period of time.
thunderstorms.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges
or put under mechanical stress. Avoid excessive thermal stress on the mains
cable from extreme heat or cold. Do not modify the mains cable. Otherwise the
mains cable may be damaged. A damaged mains cable can cause a deadly
electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective
mains socket (e.g. via the respective circuit breaker) and then carefully pull the
mains plug from the mains socket. Never use the product if the mains cable is
damaged.
• To prevent risks, damaged power cables may only be replaced by the manufacturer,
a professional workshop appointed by the manufacturer, or a similarly qualified
person.
• Never plug in or unplug the mains plug when your hands are wet.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
c) Operation
• Never touch the barrel (2) or tip (1) of the soldering iron during use. Risk of burns!
• Never use the soldering iron to heat up liquids.
• Never solder live electrical components or parts. Always switch off the power
before-hand.
• Do not cover or fasten any items to the soldering iron. Otherwise there is a risk
of fire.
• Touching or soldering capacitors (or similar components) or leads/cables that are
connected to capacitors may cause a fatal electric shock! Capacitors may stay
charged for several hours after you switch off the power supply!
• Always solder on non-flammable surfaces. Protect other materials nearby from
damage through heat.
• Risk of fire or explosion! Do not use around or near explosive or flammable
materials.
• Turn the power off and place the soldering iron on the stand while taking breaks
or not using.
d) Work Safety
• Ensure that there is sufficient lighting.
• Ensure proper ventilation during soldering. Solder and flux vapours can be harmful
to your health.
• Wash your hands thoroughly after working with solder. This is particularly
important when using lead-based solder.
• Do not put soldering alloys into your mouth. Do not eat or drink during soldering.
• Wear suitable protective clothing and safety goggles when soldering. Liquid/
splashing solder may cause serious burns or eye damage.
Operating Elements
1
2
3
4
1 Soldering iron tip
4 Cap locking screw
2 Protective barrel
5
3 Heating element (internal)
6
For safety reasons, always unplug the device during
5 6 7
8
7
Power button
Decrease button
8 LCD display
Increase button
9 Power cord
9
Werbung
