Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONNECTION
1. After removing the packaging materials, there should be 2 items: Mini Dehumidifier
& AC Wire Cord
2. Put the dehumidifier on the flat place, plug the output of AC wire cord to the AC
socket of dehumidifier, then connect the input plug to the appropriate main socket.
3. Press the „ON/OFF" button to „ON" or " I "position, the mini dehumidifier will begin
to operate. The yellow LED will be turned on. Listen and feel for the air blowing
from dry air outlet.
4. To switch off the unit, press „ON/OFF" button to „OFF" or " O "position, the mini
dehumidifier will be turned off.
REMOVABLE WATER TANK
When the water tank is full, with approximately 1500ml of water collected, the unit will
automatically switched off and the „Red" LED will come on.
To remove the water tank, first switch off the mini dehumidifier, press „ON/OFF" button
to the „OFF„ position. Then, remove the water tank from the unit and pour the water
out to the toilet or bathroom. Put the water tank back into the unit. To continue dehumi-
difying, press the „ON/OFF" button to „ON„ position again.
CAUTIONS
1. After having finished using the mini dehumidifier, the user should switch the unit off
by pressing the „ON/OFF" button to „OFF„ position.
2. Avoid using the dehumidifier and AC cord in wet or damp place, and position it in
areas where the air ventilation is good.
3. Keep the front inlet grill and the side outlet grill clear at all times and do not cover
with clothing or poly bags etc.
4. Always keep the unit at an up-right position to avoid water leakage.
<07>
Werbung
