GPO CRS-132 Handbuch Seite 11

USB Play and Recording from MIC
1. Insert the USB device to USB port on the top of unit.
2. Set USB/TAPE switch to USB.
3. Press PLAY/PAUSE button to playback music from USB device.
Press PLAY/PAUSE button again to stop playback, at the same time
the red USB/REC indicator will blink once about a second.
4. Press and hold the PLAY/PAUSE/REC button to record from the
built-in mic or stand-up mic: the red USB/REC indicator will keep
blinking rapidly. Press the PLAY/PAUSE/REC button again to stop
recording.
5. Then press and hold the PLAY/PAUSE/REC button once again to
play music or the sound recording from USB device. Press PLAY/
PAUSE button again to stop play.
6. Set the USB/TAPE switch to TAPE to stop USB playing mode and
back to TAPE mode.
Recording from Tape to USB
1. Set USB/TAPE switch to TAPE and play the tape, insert the USB
device into the USB port, press and hold the PLAY/PAUSE/REC
button to record from the tape, the red USB/REC indicator will keep
blinking rapidly. Press the PLAY/PAUSE/REC button again to stop
recording.
2. Set USB/TAPE switch to USB, Press PLAY/PAUSE button to
playback music from USB device. Press PLAY/PAUSE button again
to stop play, at the same time the red USB/REC indicator will blink
approximately once a second.
11