Suaoki U7 Benutzerhandbuch Seite 9

2. Reverse polarity protection. If the clamps are connected to the wrong
polarities, alarm would be set off (the red indicator light stays on and
the buzzer beeps) and the output would be turned off automatically.
3. Detect defective battery. If the car battery is severely damaged, alarm
would be set off (the red indicator light stays on and the buzzer beeps)
and the output would be turned off automatically.
4. Reverse charging protection.
5. Force start function.
Warning
1. Make sure that the EC5 plug of the clamp is securely inserted into the
jumping port. Otherwise the plastic part of the clamp may melt.
2. If you cannot jump-start your car, please check whether the battery
clamps are correctly connected or not. Make sure there is no rusts or dirt
on the clamps. If the car still cannot be started after 3 attempts, do not
use force start function again. Otherwise, this would damage the product.
You need to check whether your car is damaged in other ways or not.
3. DO NOT connect the red clamp with the black clamp.
4. DO NOT disassemble the product by yourself. Doing so may lead to
safety hazards and would void the warranty.
5. DO NOT use this product when the battery is bulged.
6. DO NOT place this product in a humid place.
7. Keep this product away from children.
8. DO NOT throw this product into fire.
9. DO NOT charge this product in overly high voltage or current.
10. Please note that the operating temperature of this product is -4
11. Please do not hit, shake or throw this product with force.
12. If this product dissipate heat or diminish its color during charging or
storage. Please stop using it at once to avoid leaking electrolyte,
smoke or fire.
13. DO NOT place this product close to flammable objects (such as bed
or blanket).
14. Running a discharge/charge cycle is recommended at least once
every three months. (Fully discharge the jump starter and come with a
subsequent recharge.)
15. Do not put the jump starter in a high-temperature environment for a
long time, such as the car tail box.
EN-6
~140
℉ ℉