Suaoki U7 Benutzerhandbuch Seite 5

Smart Battery Clamp
Indicator Light
EC5 Plug
Power Indicator Lights
Click on the power button and the battery indicator light would be on.
Power Indicator Light
Power Level
1. When charging the jump starter, the power indicator light would flash.
Once the product is fully charged, the 4 power indicator lights would be
on.
2. When using the USB ports or flashlight, the power indicator lights
would display the remaining battery level. When only one power
indicator light blinks, the product has a low battery level and needs to
be charged immediately. If all power indicator lights go off during use,
the protection mechanism is triggered due to low battery level.
Operation Guidance
Charging the product
1. Connect one end of the USB cable to a 5V adapter (not included). Plug
the adapter into a wall outlet.
2. Connect the other end of the USB cable to the TYPE-C input port of the
product. Once connected properly, the product will be charged
automatically.
Force Start Button
1 light
<25%
2 lights
<50%
EN-2
3 lights 4 lights
<75% <100%