SETTING UP THE HIGH CHAIR
1. Push the legs in, one at a time.
Make sure that the pin snaps into
place in the hole.
COLLAPSING THE HIGH CHAIR
1. Start with the safety table in
its locked "in-use" position.
REMOVING THE HIGH CHAIR LEGS
Downloaded from
www.Manualslib.com
Pin
Sprint
2. Fold out the legs until they lock into position.
You should hear a click. Turn the high chair over
and make sure that every part of the red panel
("LOCKED") is fully visible on the leg lock.
2. Push in the adjuster button under the safety
table and then pull the fold locks outwards.
Fold up the safety table as far as it will go.
manuals search engine
3. Fold down the safety table until
it locks into the locked "in-use"
position.
Please note!
The safety table must be in its furthest out
position before it can be fully collapsed.
Adjust the position by holding the red
adjustment button on the underside and
pulling the safety table inwards or outwards.
3. Press the leg locks together so that
the legs can be collapsed.
Push the pin in and pull the chair legs out, one at a time.
2
EN
3
2
1