Start-Up - SAB ELLIPSE Gebrauchsanleitung

The espresso machine Ellipse is to be installed to comply with the applicable federal, state or local
plumbing codes having jurisdiction exclusively by authorised technical service.
1. Open the water tap and switch on the main electrical switch.
2. Tilt the drip tray (fig.1, 11) and turn the switch
shows
3. It is now necessary to press simultaneously key C and E on the first touch pad on left side of the
machine to begin the boiler autofill process
4. The display (fig.1,6) shows
5. At the end of the filling, turn the switch to position 2 to begin the heating process. Wait till the boiler
pressure has reached the working pressure (1 bar approx). You can check it on the gauge (fig.
1.12).
6. Open the steam tap ( fig. 1,1) for some seconds and then close it. This operation avoids milk
sucking in the boiler. As the above operation causes pressure reduction in the boiler, wait till the
working pressure is reached again .
7. Your machine is now ready to work.
Downloaded from www.Manualslib.com
A B C D
Manuale Utente – User manual – Gebrauchsanleitung - Macchina caffè modello ELLIPSE
Con riserva di modifica - Specification subject to change – Änderung vorbehalten
manuals search engine
from position 0 to position 1. The display (fig.1,6)
Date hour and minutes
E
ed 2011 – Pag. 21 di 41
Start up
OFF
Select drink
Filling up