Wiseup WIFI28 Benutzerhandbuch Seite 9

5.3. Set up SD card video recording based on motion detection
Step 1: Tap the setting icon on the "Live video" page then choose "Advance Config" or
"Device Settings".
Step 2: Go to "SDCard Record Config" page and choose "On alarm", then set resolution and
file length. Enabling "Record sound" and "Loop recording" is also available.
Step 3: Tap "OK" to complete the Motion Detection Video Recording setting.
Step 4: When motion is detected, the camera will push an alarm message to your phone or
mobile device and record a video to the Micro SD card automatically. You can go back to the
"Live video" page, tap "Record" at the bottom of the screen and then tap "Remote SD Card"
or to check out the video files.
Downloaded from www.Manualslib.com manuals search engine