Galvanic Currents; User Manual Dkf-Infinity; Precaution Advices; Guarantee - Drakefor DKF-INFINITY Bedienungsanleitung

GALVANIC CURRENTS

POSITIVE IONIC GALVANIC FUNCTION
Positive ions expel stubborn dirt in the pore and allow its oxygenation and its closing.
POSITIVE IONIC VISIBLE RESULTS AND GOALS
1) Deep clean of the pores.
NEGATIVE IONIC GALVANIC FUNCTION
Negative ions introduce deep nourishment into the skin. Creams applied by hand reach
the external epidermal layer (constantly renovating). Reaching cell nourishment in deep
is fundamental to maximize the benefits of the skin care cosmetics.
NEGATIVE IONIC VISIBLE RESULTS AND GOALS
1) Deep nourishment together with ultrasounds.
2) Adsorption and absorption of active principles from the creams in the cell membranes.
3) Systematic rejuvenation.
Your device has also a massage ultrasonic function which works in two modes: intense
vibration in continual progress or relaxing mode in discontinuous progress.
USE RECOMMENDATIONS OF REGENERATOR DKF-INFINITY
1) It is not recommended the daily and prolonged use of the machine. Maximum: 20 min/
day (the face area would be ready in 3-5 minutes and the body area would take no more
than 10 minutes).
2) Wear the protection glasses included in the box, LED diodes emit electromagnetic
wavelength frequency of 480 and 640 nanometres.
3) If you are going to carry a facial treatment, you should thoroughly clean your skin
before, preferably with a facial ultrasonic brush and cleansing cream. Use nutritive cream,
toning lotion or anti-wrinkle cream and gently slide the machine with circular movements
(avoiding eyes, lips and mucosa).
4) If you are going to carry a body treatment, use a conductor gel, slimming cream,
anti-cellulite cream ... Put the machine head on the cream and massage with circular
movements between five and ten minutes each area.
5) Do not let the head more than 5 seconds in the same area without movement.
6) Once you finish the session, manually massage the treated area for a few seconds.
RELAX

USER MANUAL DKF-INFINITY

The machine is very light thanks to its innovating technology and it is complex because of
the independent but interrelated functions.
1) Plug in the transformer to the machine and after to the outlet.
2) Press the button POWER, a blue light will appear on the backlighted screen. If you press
it again, the machine will switch off.
3) Press the button MODE repeatedly: different functions will flicker. When the option that
you want would appear on the screen, press SHIFT to select the intensity. Finally, press
CONFIRM.
4) You can select multiple functions or all at the same time (recommendable).

PRECAUTION ADVICES

Warning: Please read carefully the following information before using the machine.
This product is a precision instrument designed to perfectly make its functions. In order to
make correctly work your DKF-M015 INFINITY device, please read carefully this information
and follow the instructions. This will help you to assure the guarantee validity and extend
the life cycle of the product.
1) Keep your product in a dry place and do not use it under water, the electronic
components could corrode or shot-circuit.
2) Do not keep this product next to a source of heat. It could cause an incorrect functioning:
reduce the life cycle of the product, blend or damage the plastic components.
3) Do not let the product fall and do not let it get hit. It could cause an incorrect
functioning because of a broken component.
4) Never try to disassemble the product by yourself. The maintaining and the
reparation of the components must be operated by a professional technician.
5) Use only the adaptor plug that is included in the box. A different incompatible
adaptor plug could cause an incorrect functioning what could invalidate the

guarantee.

DRAKEFOR INTERNACIONAL
18