CHESTER GT95002 Bedienungsanleitung Seite 15

GB
A fire may result if the appliance is not used with care, therefore:
– be careful when using the appliance in places where there are combustible
materials;
– do not apply to the same place for a long time;
– do not use in presence of an explosive atmosphere;
– be aware that heat may be conducted to combustible materials that are out
of sight;
– place the appliance on its stand after use and allow it to cool down before
storage;
– do not leave the appliance unattended when it is switched on.
2: BBQ / FIREPLACE CHARCOALLIGHTER (Fig. 13)
The BBQ and fireplace lighter is always to be used without the
extension handle. Remove the extension handle by pressing and releasing
button (5) and pulling the extension handle from the device.
Use:
• Attach the BBQ / fireplace charcoal lighter nozzle (10) onto the device.
• Select temperature setting II.
• Place the nozzle under the coal or the wood.
• Ensure that the device is properly positioned. The kickstand (3) could be
used for firmly support the device in the proper position.
• Insert the plug into the socket.
• Check to ensure the nozzle is not blocked before turning the device on.
• Remove the device from the coals or the wood as soon as it starts to glow.
• Now blow hot air into the coals or wood from a distance of around 5-10cm,
until the coals or wood is burning properly.
• Doing this will help to avoid damaging the nozzle attachment. Exposing the
nozzle to high temperatures for a prolonged period of time could cause the
material to melt. Please follow these instructions to achieve long -
term enjoyment with the product.
Watch Out! To avoid overheating of the BBQ or Fireplace do not use
the device for longer than necessary.
www.chestergarden.be 13