Operation - CHESTER GT95002 Bedienungsanleitung

OPERATION

Always use with caution! Do NOT cover the ventilation
openings during use as it causes a risk of burns!
Do not touch the hot nozzle!
Temperature settings:
With the temperature switch you can select from two temperature
settings. Depending on the application, you can use the following settings:
Setting I: 50 °C (cooling)
Setting II: 600 °C
The volume of air in each setting is 500L /Minute
To turn on the power:
–Slide the switch (1) to position II, depending on the application
To cooling the device:
–After working with the device at high temperature setting (position II), the
device is getting very hot. So it is suggested to slide the switch (1) to position I,
to quickly cool down the device before turn off and device for storage.
To turn off the appliance:
–Slide the switch (1) to position 0. The unit is switched off.
To install the nozzle:
The nozzles are optional for different applications and functions. The nozzles
can easily be pushed over the hot air nozzle. Never touch the nozzles during
or immediately after use of the device. The nozzles are very hot.
MAIN FUNCTION: WEED BURNER (Fig. 11)
Assemble the extension handle
The extension handle consists of two parts. Click to connect both parts.
Now attach the extension handle to the device.
Make sure that the extension handle firmly clicks into position. If using
the device as a weed killer you must use the extension handle.
Hold the weed killer firmly by holding the end of the extension handle.
www.chestergarden.be
GB
10