Commodore CD 1200 Handbuch Seite 10

Enlarged V iew
If you wish to connect your Trackball controller to your CDTV Player using
the supplied cable, simply plug one end of the cable to the port on the left side of
the Trackball Controller, plug the other end of the cable to the port on the back of
the CDTV Player marked with this symbol [ft . When the controller is
connected to the CDTV Player using the supplied cable it will draw its power
directly from your CDTV Player preserving battery life.
NOTE: ONLY USE THE CABLE THAT COMES WITH THE
TRACKBALL CONTROLLER OR AN APPROVED CD1200 TRACKBALL
CONTROLLER CABLE.
Your Trackball Controller buttons function the same way that the buttons on
your CDTV remote controller work. Use the ball in the center of the controller as
you would normally use the arrow keys on the CDTV remote controller. NOTE:
The Power button on your Trackball Controller functions like the power button on
the CDTV remote controller. If you turn off your CDTV Player with the power
button on the Trackball Controller you will have to use the power button on the
Trackball Controller to turn the CDTV player back on again.
6