Commodore CD 1200 Handbuch Seite 9

USING
YOUR TRACKBALL
CONTROLLER
1
Remove the Trackball Controller from its packaging. Remove the small
panel on the bottom of the unit, insert the two batteries as shown, replace the
bottom panel.
2
To activate your Trackball Controller press the ON button, located on the
right side of the controller. The Trackball Controller has a special battery-saving
feature which automatically turns the controller off when not in use. To
re-activate the Controller simply press the ON button again.
3
To connect a joystick(s) to the Trackball Controller plug the joystick cable
into either of the two ports on the front side of the controller marked JOY
CONTROL 1 or JOY CONTROL 2. (Check the instructions that come with
various CDTV titles for more information on which port on the Trackball
Controller to use. Not all CDTV titles support joystick control.) If you are not
certain which port to use, try the JOY CONTROL 2 port first. The controller will
automatically sense when you have joysticks connected to one of the ports.
5