Restore Factory Settings - eQ-3 Magenta SmartHome Montage- Und Bedienungsanleitung

1x long red
lighting
6x long red
flashing
1x orange and
1 x green light-
ing (after insert-
ing battery)
7
To restore the factory settings of the window / door con-
tact, please proceed as follows:
•
•
•
Downloaded from www.Manualslib.com
Duty cycle
exceeded or
transmission
failed
Device defec-
tive
Test display

Restore factory settings

The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
Pull the cap (D) off the electronic unit (B) (see
figure 2).
Remove the (old) battery.
Insert the battery ensuring that the polarity is cor-
rect and press and hold down the system but-
manuals search engine
Restore factory settings
Please try again
(see „6.2 Com-
mand not con-
firmed" on page
26 or „6.3 Duty
cycle" on page
27).
Please see your
app for error mes-
sage or contact
your retailer.
Once the test dis-
play has stopped,
you can continue.
29