4.2
You can mount the window / door contact with
•
•
to the window / door frame.
4.2.1
For mounting the window / door contact with the sup-
plied adhesive strip, please proceed as follows:
•
Downloaded from
www.Manualslib.com
For poorly reflecting surfaces (e.g. dark window /
door frames) the supplied reflecting sticker has to
be fixed to the inner edge of the window / door
casement on the opposite of the infra-red sensor
(F) or the window / door contact.
Adhesive strip or screw mounting
the double-sided adhesive strip or
countersunk head screws
Adhesive strip mounting
Attach the double-sided adhesive strip to the
back of the electronic unit (B) and press the elec-
tronic unit onto the desired position of the win-
dow / door frame (see figure 6).
Make sure that the mounting surface is smooth,
solid, non-disturbed, free of dust, grease and sol-
vents and not too cold to ensure long-time ad-
herence.
manuals search engine
Mounting
23