Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Meter; Smart Function Measurement; Auto Power Off; Dc Voltage - Facom 720.C Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35

4. Using the Meter

4.1 SMART Function Measurement

Move the rotary switch to the "SMART" position. The
default mode is "AC Current", "DC Current", "AC
Voltage", "DC Voltage", "Resistance" or "Continuity".
Connect the test leads across the circuit or load to be
measured. It will be an Automatic judgement on the LCD
display. When used the meter to measure the AC/DC
current, the meter also can display the measurement (for
example DCV or ACV or ohms or continuity) that measured
from the jaw of the meter at the same time.

4.2 Auto Power Off

If the meter is not used for approx.15 min., the meter will
automatically turn itself off to conserve battery power. To
turn the meter back on after auto off, press the "A-HOLD"
button.

4.3 DC Voltage

1. Insert the red test lead in the "INPUT" jack and the
2. Move the rotary switch to the"
3. Read measured voltage on the display.
Use extra caution when measuring high voltages to
avoid electric shock or damage.
Do not attempt to measure voltages above 600V DC
to prevent injury or damage to the meter.
26
NU-720C_0218.indd 26
Downloaded from
www.Manualslib.com
black lead in the "COM" jack.
The default mode is DC voltage. Connect the test leads
across the circuit or load to be measured.
manuals search engine
V
"position.
CAUTION
WARNING
21/02/2018 11:04:56

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis