Warranty - GYS MSW 82000 Betriebsanleitung

Translation of the original instructions
7. Other questions
a. It is a modified sinusoidal inverter; to measure the voltage, use specific equipment. (RMS)
b. If power is supplied to an audio system, radio or television, interference may occur, which is normal.
c. In order to protect the vehicle's battery, stop using the inverter when the engine is turned off.
d. Do not dismantle the inverter. For any maintenance or repair, please contact a professional.
SECURITY MATTERS
1. Do not operate the inverter with wet hands. Keep the product away from children.
2. The temperature of the casing will be high after a long working period. Let it cool for a few minutes before
touching the product.
3. Do not put metal in the inverter as this may cause an electric shock..
4. Do not touch the plug metal when plugging it into the inverter socket.
5. Keep the inverter away from explosives.
6. Keep all AC electricity away from the inverter, as this could damage it and also cause electric shock.
ALERT LIST
Function
LED
light
Low Input vol- Green:on
tage alarm Red: off
Low voltage Green:on
shutdown Red: on
Input overvol-
Green:on
tage protection
Red: on
Overload pro- Green:on
tection Red: on
Overheating Green:on
shutdown Red: on
Output Green:on
short-circuit Red: off

WARRANTY

The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
MSW 82000
State description
AC
Alarm
output
Yes Yes
No No
No No
No No
Yes No
No No
Restart the working method
When the battery voltage returns to the corresponding range,
the alarm stops automatically..
When the battery voltage returns to the corresponding range, turn
the inverter off for 3 to 5 seconds, then turn it on to restart: green
light on, red light off.
24V battery restart tension : DC 23.4 V - 24.6 V
When the battery voltage returns to the corresponding range,
turn the inverter off for 3 to 5 seconds, then turn it on to restart:
green light on, red light off.
Reduce the load to the corresponding range, turn the inverter
off for 3 to 5 seconds, then turn it on to restart: green light on,
red light off.
When the inside temperature returns to the corresponding
range, turn the inverter off for 3 to 5 seconds, then turn it on to
restart: green light on, red light off.
When the short-circuit is rectified, the inverter restarts automa-
tically.
EN
9