Settings - Fracarro MBX Serie Handbuch

To get an easier access to the settings it is
possible to remove the cover:
(1) Open the cover a little bit
(2) Push the cover slightly towards the
power supply unit
() Remove the cover
To change the switch position to enable, for
example, the DC pass on one input or extend
the FM frequency range of the band 1, remove
the label

SETTINGS

To get access to the settings:
(1) Unscrew the two safety screws
(2) Open the cover
The attenuators for the gain adjustment are now
accessible.
The position and specifications of each path are
described on the label.
label
5
3
3
2
1