INSTALLATION INSTRUCTIONS Loose screws to remove the cover plate Relocate the lamp holders from the casing and fix them into grooves at both ends of the casing Drill holes at the predefined mounting positions, and Mount the cover plate on the casing and fix the embed plastic plugs for M4 screws (prepared by cover plate with screws customers)
2 meters form the ground. This switch shall be equipped with a locking device, which can only be operated by dedicated operator; The original design and testing of this product is based on OSRAM HNS T8 36W double-end UV ―...
Mitarbeiter bedient werden kann; Das ursprüngliche Design und die Tests dieses Produkts beruhen auf der Doppelend-UV-Leuchtstoffröhre ― OSRAM HNS T8 36W. Die Funktionsweise kann sich bei Verwendung anderer Lichtquellen verändern; Die OSRAM HNS-Röhre enthält Quecksilber; bitte befolgen Sie bei der Entsorgung gebrauchter ―...
L’interrupteur doit être équipé d’un dispositif de verrouillage qui ne peut être actionné que par un opérateur dédié ; Le design original et les essais du produit sont basés sur le tube UV à double culot OSRAM HNS T8 36 ―...
Seite 6
2 meter vanaf de grond zijn. Deze schakelaar moet worden uitgerust met een sluitsysteem dat alleen kan worden bediend door de betreffende operator; Het originele ontwerp en de testprocedure van dit product zijn gebaseerd op een OSRAM HNS T8 36W ―...
Seite 7
More information English OSRAM Kunshan Display Optic Co., Ltd. No.2 Building, No.179 Waihejing Road, Kushan FTZ, China...