Werbung
INSTALLATION INSTRUCTIONS
Loose screws to remove the cover plate
Drill holes at the predefined mounting positions, and
embed plastic plugs for M4 screws (prepared by
customers)
Connect the power cable in
terminals
Mount the ultraviolet source into the lamp holder in the direction shown in the figure, rotate 90° and fix it
Plug the grounding socket on the
cover plate in the casing
Relocate the lamp holders from the
casing and fix them into grooves at
Mount the cover plate on the casing and fix the
cover plate with screws
Mount the cover plate on the casing
and fix the cover plate with fastening
screws
both ends of the casing
Werbung
