Cleaning And Maintenance; Appliance Front And Control Panel; Interior Of The Warming Drawer - Zanussi ZWD141K Benutzerinformation

CLEANING AND MAINTENANCE

Cleaning is the only maintenance activity that
is generally required.
WARNING! The warming drawer must be
disconnected from the power supply be-
fore cleaning. Unplug the device from the
socket or isolate its power supply circuit.
Do not use harsh or abrasive cleaning
products, scouring pads/sponges or sharp
objects, since this could cause stains or
scratches. Never use high pressure or
steam jet cleaning appliances.

APPLIANCE FRONT AND CONTROL PANEL

The warming drawer can be cleaned using just
a damp cloth. If it is very dirty, add few drops of
washing-up liquid to the water.
Wipe the surfaces dry using a dry cloth.
For stainless-steel fronted warming drawers,
special products for stainless-steel surfaces can
be used.
These products prevent the build-up of dirt on such
surfaces. Apply a thin layer of this product on the
surface using a soft cloth.
On aluminium fronted warming drawers, use a
delicate glass cleaning product and a soft, lint-free
cloth. Wipe horizontally without applying.

INTERIOR OF THE WARMING DRAWER

Clean the interior of the warming drawer regularly
using a damp cloth. If it is very dirty, add few drops
of washing-up liquid to the water.
Wipe the surfaces dry using a dry cloth.
Avoid water entering the air circulation opening.
Only use the warming drawer again when it is
completely dry.
8
Non-slip base
The non-slip surface mat can be removed to facili-
tate cleaning of the drawer.
The mat can be cleaned by hand using hot water
with a few drops of washing-up liquid. Dry thor-
oughly.
The non-slip mat should only be replaced when it is
completely dry.