Control Panel - Getinge 600 Serie Bedienungsanleitung

Control panel

Green: Process
complete
Yellow: Red: Disinfection
Process not achieved, or
running other fault code F
NOTE:
Only call service personnel when fault code F occurs. In the event of fault code U or H the
fault can be rectified by the user.
Button/lamp Operation
L
When the yellow lamp comes on: The machine is running a program.
The temperature and cleaning phase can be seen on the display.
When the green lamp comes on: The program is complete. The green lamp goes
M
out when the door is opened and the maximum process temperature is shown on
the display .
O When the red lamp comes on: The machine has reached the disinfection temperature or
another fault has occurred (Fault code F).
t
Button to start the economy program for urine bottles.
u
Button to start the normal program for normally soiled items.
INTENs Button to start the intensive program for heavily soiled items.
* Button for Pouch eater program Getinge 608
u
i
The button combination for program selection with cleaning agent for general circula-
+
tory items, e.g. hand bowls.
i
The button combination for program selection with cleaning agent for heavily soiled
+ INTENs
goods, e.g. wound dressing instruments.
h
Button to start peripheral flushing. Peripheral flushing cannot be started with the pedal.
NOTE: No disinfection!
Pedal starts the selected program
Peripheral flushing
Display
&=q
Economy program
Cleaning agent
Intensive program
Pouch eater program*
Normal program
Page 9 of 128