AEG CTV 4868 Bedienungsanleitung Seite 53

Analog Audio Setup Page
This page is for setup speaker output.
DOWNMIX
LT/RT Choose this setting if you want the play the DVD with the Pro Logic Dolby stereo effect. This
produces a almost real 2-channel replay effect.
STEREO Choose this setting if you want to play a DVD, that has been produced in the 5.1-Audio format,
as 2-channel stereo sound.
Dolby Digital Setup
The following menu items can be changed:
DUAL MONO
The Audio output is normally in stereo. Here you can have the possibility to choose Mono-output instead of
Stere-output.
STEREO The Audio output is in Stereo.
L-MONO The Audio output is in Mono. In this case the signal of the "left" stereo channel is transmitted to
all speakers.
R-MONO The Audio output is Mono. In this case the signal of the "right" channel ist transmitted to all
speakers.
MIX MONO The Audio output is Mono. In this case the signal of the "both" stereo channels is transmitted to
all speakers.
DYNAMIC
The term „Dynamic" (Dynamic Range) describes the ratio of quitest and loudest sound. If the dynamic range
is very large, you will experience very quit and very loud sounds.
This may cause replay problems. Let us assume that you are watching a DVD in a relative loud environment.
You can now increase the volume to be able to hear also the very quit passages, however with the
19" TFT LCD TV CTV 4868 LCD/DVD
MENU SCREENS DVD
53
GB