Basic Controls; Setting The Clock; Hiding/Displaying The Clock; Safety Blocking - Bertazzoni F45CONMOWX Bedienungsanweisung

EN

Basic controls

Setting the clock

After your microwave oven is first plugged in or
after a power failure, the clock display will flash to
indicate that the time shown is not correct. To set
the clock, proceed as follows:
1. Press the Clock key. The hour numbers will
start to flash.

Hiding/Displaying the Clock

If the clock display disturbs you, you can hide it by
pressing the Clock key for 3 seconds. The dots
that separate the hours and minutes will flash but
the rest of the clock display will be hidden.

Safety blocking

The oven functioning can be blocked (for
example, to stop it being used by children).
1. To block the oven, press the Stop key for 3
seconds. You will hear a sound signal and the
display will show the word "SAFE". The oven is
blocked in this state and cannot be used.
8
2. Press key "-" and "+" to set the hours.
3. Press again the Clock key to set the minutes.
The minute numbers will start to flash.
4. Press key "-" and "+" to set the minutes.
5. To finish, press the Clock key again.
If you want to see the clock display again, press
the Clock key again for 3 seconds.
2. To unblock the oven, press the Stop key
again for 3 seconds. You will hear a sound
signal and the display will show the time
again.